Your cart is empty!
Available keyed alikeKeyed on one side, thumbturn on the otherUp to 6 Keyed alike
Non-locking Plain knob on both sides Turning either knob retracts latchAll steel latch
Non-lockingReversibleTurning either lever retracts latch
4-7/8" faceplate with 3-3/8" aux rampFail secure16-24 AC/DCUse on commercial doorsCan be used with Kwikset Deadlocking Gate Latches MCLXL14S32D, KW462KN26D, KW5883, KW5893 and KW58926D ...
Mortise type 6-7/8" radius corner faceplateFail secure16-24 AC/DCUse on commercial doorsCan be used with Kwikset Deadlocking Gate LatchesMCLXL14S32D, KW462KN26D, KW5883, KW5893 and KW58926D ...
24 VAC OnlyFaceplate: 1-1/4"H x 4-7/8"W x 1-11/16" D Cavity: 1-1/2"H x 3/4"W x 7/8" D Stainless Steel Mortice type backset Left or right handingMCLXL14S32D, KW462KN26D, KW5883, KW5893 and KW58926D ...
Normally openInterior useSnap fits into 5/8" hole
Can be used in conjunction with Kwikset Deadlocking Gate Latches KW5883, KW5893, KW58926D
Requires 1/2" hole through wallFull adjustment for wall thicknessSpring loaded
Heavy duty, architectural grade and exceed ANSI Gr. 1 Non-handed, for left or right For institutional / commercial useLatchbolt - stainless steel 3/4"
Features: QED300 Series Non-handed, for left or right For multi-family/tenant uses. Field sizeable: 36" device to 32" Thru-bolted trim design for security Strike _ Stainless steel body with plated steel roller standard (Rim Only)Benefits: Tested to exceed the 500,000 cycles required for Grade 1 certification
Heavy duty, architectural grade and exceed ANSI Gr. 1 Non-handed, for left or right For institutional / commercial use
Non-handed, for left or rightField sizeable: 36" device to 32"Door thickness - 1-3/4" standard Latchbolt - 1/2" throw top; 3/8" bottomStile width - 3-7/8" (98mm)Rim cylinder is not included
Use with surface mounted rim exit devices; up to 1" throwAutomatic voltage sensing 11 to 28 volts DCSatin stainless steel finishFail secure/fail safe: field reversible Holding force: 1500 lbs.
Plated
PlatedLength - 36 inches
Driver for 1/4" Screws
For fast installation of one-way screws
For Torx or other bitsBits not included1/4" Magnetic Bit Holder
Used with bit holder for installation of Torx tamper-resistant screwsSize : T40
For Torx or other bitsBits not included1/4" Hand Bit Driver
Available in hex head or flat headThe screw is the anchor, no need for additional mounting hardwareHigh-low thread designNo hole spotting requiredDrill bit included with box of 100Perma-Seal™ coated carbon steelUses:Window Installations, storm shutters, interior hard rails, interior lighting fixtures
Available in hex or flat head The screw is the anchor, no need for additional mounting hardware High-low thread design No hole spotting required Drill bit included with box of 100 Perma-Seal™ coated carbon steelUses:Window installations, storm shutters, interior hand rails, interior lighting fixtures