Your cart is empty!
600 lb. lock with mortise mounting tabsBuilt-in LED light and timer on GTDKMLM61LT
49" armored aluminum cable3/8" I.D. FlexCable is easily shortened
12 or 24 VDC (selectable)For outdoor sliding and swinging electric gatesFace and surface mountingStainless steel finishWaterproof and weatherproofVandal resistant No residual magnetism, MOV surge protection, pre-wired, adapter and mounting hardware included Indoor or outdoor
Black powder-coated steel housing with 3500 lbs. of force12 Volt DC onlyRecommended for gates over 8 ft. Wires directly to all GTO/PRO® gate operators Bolt-on and weldable hardware included
To hinder theft Substitute for clevis pin of the GTO/PRO DC series swing & slide operator systems
1200 lb. or 600 lb. magnetic lock
1200 lb. or 600 lb. magnetic locksIncludes one "Z" bracket and one "L" bracketIncludes cover plate to hide mounting screws
Energizes the magnetic lock when the gate operator completes its cycle110VAC or 24VAC or 12VDC input voltage
With die-cast aluminum end caps Surface mounted 18" stainless-steel cables, designed to protect the wires to the electric locks or access systems mounted in doors
1,200 or 600 lb. holding force 12 or 24 VDC (selectable)Complete mounting hardware For indoor use
Stainless steel bolt, 5/8" dia., 5/8" throwThe fail-secure model incorporates manual unlock cylinder to operate if power is lostPower: 12 VDCLock body: 7-7/8" x 1-5/16"Strike plate: 3-9/16" x 1" x 1-1/8"
Concealed security for remote access and exitWorks with sliding, single-action, and double action (swing-through) doors and gatesEasily connects to SECO-LARM's electronic keypadsFail-secure operation (unlocks if power is lost)12 VDC or 24 VDC
With LED and timerFor indoor use1,200 lb. holding force12 or 24 VDC (selectable)Built-in adjustable relock timer, 1~78 sec.
Designed for the GL1 Solenoid Gate lock and the M62FG-SASM gate Magnalock
Self-aligning receiver (+/- 1/2" horizontally) helps compensate for gate misalignment and sagProvides 2000 lbs. of holding forceAutomatic dual voltage- no field adjustment12/24 VDCStandard fail-lockedOptional latch status monitorSurface monitorBlack finish
Designed for the GL1 Solenoid Gate Lock and the M62FG-SASM gate Magnalock
Accommodates in-frame horizontal adjustment and 5/8" - 3/4" latchboltsFaceplate (4-7/8" x 1-1/4")12/24 VDC
Kit Includes:Tool BoxHeavy Duty Drill GuideBlind Nut Placement ToolSex Bolt - M32/M62/M82T-Handle Hex WrenchHardware Packs - M32, M62/M82Rubber WashersFlat WashersInsulated Crimp ConnectorsThreadlock1/8" Cobalt Drill Bit3/8" Cobalt Drill Bit3/8" Carbide Drill Bit1/2" High Speed Drill BitBlind Nuts with CollapsingToolFinish CapsLong Screw Pack ...
1200 lbs. holding force Shear aligning MagnaLock® Mounts fully concealed into wood, steel, or aluminum doors 12/24 VDC 10 ft. of jacketed stranded wire
500 lbs. holding force Automatic dual voltage for mounting in sliding doors 12/24 VDC 10 ft. of jacketed stranded wire
1200 lbs. holding forceWeatherproof face mounted Shock absorbing strike mount controls excessive impact 12/24 VDC 10 ft. of jacketed stranded wire
Eliminate Welding; Fast, Easy and Nicely Finished Mounting Using Quick-Fix Bolts and Drilling Five Holes Surface mountedGuaranteed holding force tested on every magnetic lockAnti-residual magnetism kick-off systemFail openDesigned for exterior use; Weatherproof aluminum housingTwo-layer protective coating developed for outdoor use500h salt spray resistant; SGS Certified (ISO 9227)Voltage: 12V / 24V DC Minimal Pulling Force: (1300 lbs) Current: 460 mA /12 V or 230 mA / 24 V ...
12 Volt DCIncludes lock, receiver, push button, digital keypad and batteries 3500 lbs. of forceHorizontal use on walk-thru Keyed manual override
With weldable brackets for armature and magneticFor indoor or outdoor use600 or 1300 lbs. of holding force